| Long Description
|
Enter a detailed specification for the device that
you want to order.
|
| Considerations
|
Enter any considerations that your organization may
have as it pertains to this custom part.
|
| Unit of Measure
|
Depending on the type of part you may have a unit of
measurement that you want to use for ordering.
|
| Material Description
|
Enter a short description of the part that you are
creating that accurately describes what is such as "Transformer."
|
| Catalog Number
|
If you have some type of part number that you want
to reference for this custom part you can enter it here.
|
| Other Data
|
You can enter any additional information relevant to
the part here.
|
| PO Number
|
If you have a purchase order number for this part
you can enter it here.
|
| PO Item
|
If you have a purchase order item number for this
part you can enter it here.
|
| Internal Comments
|
Enter any comments that pertain to internal
colleagues within your organization.
|
| Manufacturer
|
Enter the name of the manufacturer who will create
the part for your order.
|
| Do Not Purchase
|
In cases where you might already have this custom
part in your own inventory you can set this to "No" to indicate that it should
not be ordered.
|
| Requirement Date
|
Enter the date by which you need the custom part.
|
| Delivery Address
|
Enter the address that the part should be shipped to.
|
| Customize
|
The Customize
 option lets you turn on or off
specific fields based upon your needs. The fields that are listed depend on
what is configured in the following file:
C:\ProgramData\Bentley\OpenUtilities Substation CONNECT
Edition\Configuration\WorkSpaces\Substation ANSI-IEEE
Example\Standards\Substation\Config\Options\ default.SystemOptions.xml
|
